Strengths of self-locking multipoint engine lock

​

The lock can be connected to the TMS door management system via the DCW® system bus without additional control and is automatically recognized as a participant.

A particular strength is that the lock-controlled escape route system with M-SVP 2200 DCW® can be controlled, configured and monitored with the TMS Soft- software.

The powerful double motor unlocks the door when controlled by e.g. Access control systems or TMS and locks the door with each closing securely.

The combination of concurrent swivel and bolt locks offers high burglary protection up to RC 4. The M-SVP 2200 DCW® is approved as an emergency exit lock according to EN 179 for doors in escape and rescue routes and for use in fire and smoke protection doors.

​

Further advantages of DCW®

​

In combination with the automatic actuators dormakaba ED 100/250, barrier-free access solutions can be realized as required. If the ED is equipped with a DCW® Upgrade Card, the lock and drive can also be directly connected without external control.

​

With integrated handle contact

​

In addition to the feedback "door open / closed" and "locked / unlocked", the M-SVP 2200 DCW® also has a push-button contact. This increases the functional safety and is also evaluated by the TMS escape route safety device.

If the operating frequency is high, the lock can be operated in the mode of permanent release or day-fall function (only the latch is extended).

​

Multiple locks for burglary protection up to RC 4 in suitable door systems

​

M-SVP 2200 DCW® multi-point locks lock door systems particularly securely - automatically with each closing.

The swivel and duo bolt bolts are made of high-quality steel, the double motor allows all locking elements to firmly engage in the striking plates.

​

Particularly high sealing of the door ensures energy savings

​

The tight fit and the co-rotating swivel bolts not only effectively prevent the door from lifting, but also ensure a particularly high degree of sealing and thus less energy and heat loss.

A decisive contribution to the sustainable construction and fulfillment of the door system standard EN 14351. From the inside, the door can be completely unlocked at any time via the handle.

​

Operation with M-SVP-S 24 DCW® control

​

If the lock is not to be integrated into a door management system, all special functions can be fully utilized in stand-alone operation with the M-SVP-S 24 DCW® controller.

​

Profile-related delivery sets

​

The M-SVP 2200 DCW® is available as a profile-based delivery system for doors made of steel, aluminum, wood and PVC, which considerably reduces the configuration effort when ordering.

For trouble-free operation of the M-SVP 2200 DCW® engine locks, freewheel cylinders with FZG marking are required.

​

Successor

​

The self-locking multi-point motor lock M-SVP 2200 DCW® is the successor to the self-locking multi-point motor lock M-SVP 2000 DCW®.